User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL67
5.Emptyproductfrom calibration bucket caught during
the Prime cycle. Reposition calibration bucket under
meterand select"Calibrate".Themeterwillturnat the
sameRPMasintheprimemode.
6.Meter will beginto turn. Stop the meterby selecting
"Continue".
7.Enterthetotalweightofproductcaughtminusthe
weightoftheemptycalibrationbag.Select"OK"when
finished.
8.Calibrationforthismeterisnowcomplete,repeatstepstocalibrateremainingmeters.


ATTENTION:DONOTINCLUDETHEWEIGHTOFTHECALIBRATIONBAGINTHEMETERED
WEIGHTVALUE.THEMONITORMUSTBE POWEREDDOWNPROPERLYBYPRESSINGAND
HOLDINGTHEPOWERBUTTONUNTILTHEMONITORPOWERSDOWN.FAILURETODOSO
WILLRESULTINLOSTDATA. 


FIGURE4.71
FIGURE4.72
FIGURE4.73