User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL61
5.Backlight:Setsthedisplaybacklightlevel.Navigate
to this selection and press the spinner knob to
highlight the item. Rotate the spinner knob to
increase or decrease the backlight and press the
spinner knob or “Enter” to set the new backlight
setting.

6. Contrast:Sets the display contrast. Navigate to
thisselectionandpressthespinnerknobtoh ighlight
the item. Rotate the spinner knob to increase or
decreasethecontrastandpressthespinnerknobor
“Enter”tosetthenewcontrastsetting.
7. Master switch mode: The choices are “Manual”
and “Auto”. Manual is used when the operator
engages and disengages the drive by pressing the
“ACK”buttonatthebeginningandendofeachpass.
Auto is used when a lift switch on the implement
engages and disengages the drive. Manual is the
normalmodeofoperation.
8. OK/Cancel: Select “OK”to saveany changes that
have been made or Cancel to ignore changes that
havebeenmade.
FIGURE4.56
FIGURE4.59
FIGURE4.57
FIGURE4.58