User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL58
3.Addasensor:IndividualsensorscanbeaddedtotheMuxBussystematanytime.Placethe
highlightbaronthesensorneedinginstalled(Fan 2intheexample)andpress“install”.Then
pluginthesensor.Multiplesensorscanalsobeaddedusingthismethodbuttheuserneedsto
positionthehighlightbaroneachnewsensorandpress“Install”beforepluggingineach
sensor.











4. Remove a sensor: Individual sen sors can be removed by placing the highlight bar on the
sensortheuserwantstoremoveandpressin g“Remove”,unplugthesensor.

5.SensorSettings:Specificinformationabouteachsensorinstalledon theMuxBussystemcan
beviewedbyplacingthehighlightbaronthesensorandpressing“Settings”.Themonitorwill
displaythesensortypenumber,communicationspeed,andserialnumber.Sensorswithauser
settablevaluehaveadialogboxthatcanbeaccessedtoenteravalue.Todothis,navigateto
thedialogboxandpress“Enter”.Akeypaddropdownboxwillappear.Usethespinnerdialor
navigation keys to highlight the individual numbers you want to enter starting with the left
mostvalue.


NOTE: The user press the spinner dial to select individual numbers, then press the “Enter”
buttontosavethecompletevalue.

FIGURE4.47 
FIGURE4.48 
FIGURE4.49 