User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL46
4.15 SEEDHAWKLOUPIIIAIRDRILLMONITOROPERATION 
TheSEEDHAWKLOUPIIIAirDrillMonitoriscapableofmonitoringanddisplaying:

‐GroundSpeed
‐Upto2FanSensors
‐2Motors
‐2BinLevelSensors
‐LiquidFlowMeter
‐HydraulicPressure
‐ShankAppliedDownPressure
‐FieldArea
‐TotalArea

The Monitor will sound an  alarm to alert the operator if it detects any of the following
conditions:

‐LowMeterSpeed
‐LowBinLevels
‐LossofMotion
‐LoworHighFanSpeed

TheMonitorallowsthefollowingsettingstobechanged:

‐GroundSpeedpulsesper400feetandpulsesperrevolution
‐LowBinalarmpointfor2bins
‐Thewidthoftheimplement
‐Thedisplayunits(Imperial/Metric)
‐LowandHighalarmpointsfor2Fans
‐PulsesperRevolutionforFlowMeter
‐Applicationrateforeachmeter

These settings, as well as the Field and Total Acres are stored in non‐volatile memory.
This
meansthattheinformationisretainedevenwhenpowerisdisconnected.