User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL33
4.5 PRE‐OPERATIONCHECKLIST
 Inspecttires.Checktireinflationp ressureandadjust,ifne cessary.
 Inspectwheelhubfasteners.Adjusttorquetopropersetting,ifnecessary.
 Checkdepthsettingofpackerwheelarms.Adjust,ifnecessary.
 Checkdepthsettingoffertilizerknives.Adjustifnecessary.
 Checktractorhydraulicreservoirlevel.
Addhydraulicfluidiflevelislow.
 RefertotractorOperator’sManual.
 Inspectallhydrauliclines,hoses,fittingsandcouplers.
 IMPORTANT!Useacleanclothtowipeanyaccumulateddirtfromtheimplementand
tractorcouplerspriortoconnectingthehydraulicsystem.
 Inspectseedanddryfertilizerdistributionsystem.
 Make sure manual wing locks shown in FIGURE 10 are un‐pinned and the pins are
placedinholderpriortowingingdown.Onlyleftsideshown,willneedtodothesame
procedurefortherightsideofthemachine.
 
NOTE: Check wheel hub fasteners periodically to ensure proper tightness, especially
priortotravelonpublichighways.

FIGURE4.3 