User guide

SEEDHAWK®30SERIESOPERATOR’SMANUAL23
2.10.4 SAFETYSIGNINFORMATION

SafetySignLegibility
Allsafetysignsappliedtotheimplementmustbevisibleandlegible.Keepdustanddirtcleared
fromsafetysignsandensurethatvisibilityisnotobscured.

SafetySignReplacement
Replacement safety signs may be ordered through your dealer or distributor. Contact Seed
HawkInc.ifunabletoobtainreplacementsafetysignsfromadealerordistributor.

Damagedor DeterioratedSafetySigns
Remove and replace any safety signs that have either been damaged or show signs of
deterioration.

SafetySignsonReplacementParts
Ensure that parts or components that are replaced on the implement that had a safety sign
attachedoriginallyincludeasafetysign.

AffixingSafetySignstoImplement
1.Ensureproperpositionandorientationbeforeinstalling.
2.Ensureinstallationareaiscleananddry.
3.Ensureambienttemperatureisabove10˚C(50˚F).
4.Removebackingmaterialtoexposelabeladhesive.
5.Placeoneedgeoflabeltomachinesurface.
6.Slowlypressthelabelontothesurface.
7.Ensurenoairpocketsexistundersurfaceoflabel.





