Manual

SEED HAWK
®
2014 30 SERIES OPERATOR’S MANUAL – DOMESTIC 33
5.0 Seed Hawk Loup III
Air Drill Monitor
Operation
The Seed Hawk Loup III Air Drill Monitor is capable of monitoring and
displaying:
The monitor will sound an alarm to alert the operator if it detects any of the
following conditions:
The monitor allows the following settings to be changed:
Ground Speed
Up to 2 Fan Sensors
2 Motors
2 Bin Level Sensors
Liquid Flow Meter
Hydraulic Pressure
Shank Applied Down Pressure
Field Area
Total Area
Low Meter Speed
Low Bin Levels
Loss of Motion
Low or High Fan Speed
Ground Speed pulses per 400 ft.
and pulses per revolution
Low alarm point for two bins
The width of the implement
The display units (Imperial/Metric)
Low and High alarm points for fan
Pulses per Revolution for Flow
Meter
Application rate for each meter
These settings, as well as the Field and Total Acres are stored in non-volatile
memory. This means that the information is retained even when power is dis-
connected.