User's Manual

SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
Connecting and disconnecting two devices
First, connecting. This can be done by using the
respective function in your phone. Also, the headset can
connect to its "default device" by pressing the talk button.
But please keep this in your mind : in the latter case, the
headset will try to redial the last dialed number after the
connection is established.
So, it is strongly recommended that you should initiate
the connection with your phone.
Now to the disconnecting method. You can simply switch
off the headset. You can also disconnect the headset in
your phone's menu. Of course, taking the headset out of
phone's Bluetooth radiation range, 10 meters, can
disconnect the Bluetooth link.
You can also get the headset to enter the pairable mode.
Then the Bluetooth connection is closed and the
headset entering the pairable mode.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
More about pairing procedure
Before the headset can be used with your phone, the
phone has to be paired with the headset. The headset
can be paired with up to 3 phones. It can be connected
to only one phone at a time, however.
The phone which is last paired with the headset or
connected to the headset is called the "default device".
The headset acts as if it knows only one phone, the
default device. So, user actions such as pressing on the
button makes the headset connect to the default device.
To change the default device, you can pair the
headset with another phone you want to make the
default device. If the phone has already been paired with
the headset, you simply need to connect to the headset
from the phone. That will change the default device.
Removing all paired information from your
headset
Push the volume up and volume down button