Operation Manual

4. Call Feature

4.1 Phone Book

AT command and OPP (Object Push Profile) function can automatically

transfer the contacts from mobile to Vossor

HINTS: NOT ALL MOBILES SUPPORT ABOVE FEATURES

4.1.1 AT Command

To Transfer the Phone Book from mobile via AT command:

(Please make sure the Vossor and the mobile is connected)

1. Press

2. Scroll the menu by pressing or until you see PHONEBOOK

3. Press to enter Phone Book Transfer Inquire

4. Press to start or Press to cancel

5. When contacts transfer is processing, LCD will show and

blinking.

6. Once transfer was succeeded, it will indicate

4.1.2 OPP (Object Push Profile)

Vossor supports single contact or group contacts transfer via OPP

function. For detail operating procedures, please refer to your mobile

phone's user manual.

To Transfer the Phone Book from mobile via OPP:

1. Disconnect Bluetooth link from Vossor setting

(If it is currently connected)

2. Do the proper setting on the mobile phone for copying and

transferring the contacts from the mobile phone to Vossor.

(Please refer to you mobile phone's user manual)

3 .When the contacts is transferring, display shows

4. After transferring done, display shows “xxx records”. The “xxx” is

a number representing the total contacts which have been

successfully transferred to Vossor.

5. Connect Vossor again.

Access phone book in Vossor to check whether the contacts were

successfully transferred.

3.8.4 DTMF (Dial Tone Modulation Frequency)

To use DTMF Function:

1.Hold for 2 second.

2.Scroll the desire number by pressing or

3.Press to dial

HINTS: This function is available only during conversation

Some mobiles are able to register multiple phone numbers under the same

name.Vossor phonebook can distinguish the number by a suffix

<M> (moblie), <H> (home) and <O> (office) at the caller's name.

ENGLISH