Bluetooth® Pendant type Handsfree Kit STARTREC Model No : SFK509 User Manual
In the Package STARTREC User Manual Charging Adapter (TA ) Necklace Type Earphone Part Description * Front 1. Charging(RED) &State LED(Blue) 1 2. Call/Power Button 3. Volume Up/down 2 3 6 7 5 4. Mic 5. Power Connector & Earphone Outlet 6. Speaker 7. Reset 4 * Rear 1.
1. How to Use a. Charging - Open the Power Connector Outlet cover. - Connect the supplied charger to the Power Connector Outlet. Î When the Charger is plugged in, the LED light of the SFK509 will be Red. When fully charged, which may take up to 3 hours, the Red LED light will be turned off. Tip) - Low battery status will be indicated with a beep every 10 seconds. It is recommended that the device should be charged immediately. b. Power On - Press and hold the Call/Power Button for 2 ~ 3 seconds.
e. Adding Mutiple Handsets - The SFK509 can store up to 3 different handsets in its memory. However it can only connect up to one Bluetooth device at a time. - In the case of adding a 4th handset, the first unused registered handset will automatically be removed. - If you want to permanently keep the first registered handset onto your SFK509, manually connect the handset to the SFK509 before adding a 4th device.
j. Speaker Volume Control - Press the Volume (+) Button to increase the speaker sound, and the Volume (-) Button to lower the sound. Î The volume level can be adjusted from 1 to 8. k. Transferring Audio a) Handset to SFK509 - To switch from the handset to the SFK509 while on a call, press the Call/Power Button. Î The call will be transferred to the SFK509. b) SFK509 to Handset - Switching from the SFK509 to the handset can be operated from the handset menu options.
2. LED Indication Function Startrec Status Power off Booting Idle Operating Discoverable (BLUE LED) LED Status LED off LED On until initialization On(0.5 sec) Off(10 sec. repeatedly) On(1 sec) – Off(1 sec) repeatedly until discovered Connecting Blinks until connection is established Ringing Blinks (3 times) & Off (2 sec) when answered. Charging (RED LED) No Charging RED LED Off Charging RED LED On Full Charging RED LED Off 3.
4. Specifications Item Description Bluetooth Specification Ver 1.2 Supported Profile Handsfree, Headset, A2DP,AVRCP,GAVDP Rx.Sensitivity Typ. 72dBm Battery 3.7V, 200mAh Li-ion Speaker 8 Ω / 0.5W(normal) MIC 44dB / Omni directional Standby Time < 200 hours Talking Time < 7 hours Music Play Time < 7 hours Operating Temperature –20℃ ~ 60℃ Dimension 65.9 x 29.3 x 18.5 (mm) Weight 22g Limited Warranty 1. This product was produced under strict quality management and inspection. 2.
FCC NOTICE TO USERS : This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE : To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted.
