User's Manual

8
Configuration
Pairing with a Bluetooth
mobile phone
7
Turn on the Power switch.
Power on
Turn off the Power switch
Power off
●●
For higher volume, press button .
●●
For lower volume, press button.
Speaker Volume control
In order to increase the volume of the
microphone, press SEND and END button
simultaneously until you hear the "beep"
sound.
●Repeat four times to go back to initial stage.
Microphone Volume control
Double click the Audio Transfer button.
●The speaker will mute after the beep sound is heard.
(The sound will still be heard through the earphones.)
●To cancel the mute function, double click the Audio
Transfer button.
Speaker mute
Press the END button for more than
2 seconds.

The blue LED will flash once a second
with a melody.
1
From the handset, search for and register VOSSOR.

Please refer to the user’s manual of the handset.

Enter "0000" when a pincode(or passcode) is requested.

when the pairing is completed, the blue LED of VOSSOR flashes
every 4~5 seconds with a melody. If it flashes once a second,
please try again from the beginning.
2
After pairing the Bluetooth mobile phone with VOSSOR,
you can use it as a handsfree unit.
I Pairing can be done with up to a maximum of 3 handsets. I
• VOSSOR stores up to 3 different phones in memory.
• Keep in mind that the latest phone number removes the earliest one when
the memory is full.
• Priority is given to the most recently paired handset.
• If you want to change the handset priority, try to connect VOSSOR from
the handset.
• If the latest paired handset supports handsfree profile, VOSSOR is
connected automatically to the handset when the power is on.

Once your phone is paired with VOSSOR, it will automatically
recognize VOSSOR.