User's Manual
12
When the headset is connected to the
base station, charging works
automatically.
Press 2 volume control buttons of the
base station at the same time for more
than 1 second.
•It becomes waiting status for pairing, and blue
LED of the headset flashes every 1 second.
1
From the handset, search for and register the
ViaSync.
•Please consult with the user manual of the
handset(refer to the P.11).
•During the procesure, pincode(or passcode)will be
demanded. Then, enter '0000'.
•When the registration is completed, blue LED of the
headset flashes every 4~5 seconds with a melody.
If it flashes every 1 second, please try from the
beginning again(from article 1).
2
How to pair with base station
2
Press 2 volume control buttons of the base
station at the same time for more than 1
second.
•It becomes waiting status for pairing with a melody,
and blue LED of the headset flashes every 1 second.
1
From the handset, search for and register
the ViaSync.
•Please consult with the user manual of the
handset(refer to the P.11).
•During the procesure, pincode(or passcode)will be
demanded. Then, enter '0000'.
•When the registration is completed, blue LED of
the headset flashes every 4~5 seconds with a
melody.
If it flashes every 1 second, please try from the
beginning again(from article 1).
Once you make pairing with ViaSync,
you don't have to make pairing again
with the paired unit.
It recognizes automatically next time.
2
You can make pairing through the base station or headset.
Pairing with PSTN adapter - Optional
11
How to pair with base station
1
Composition Connection Usage Reference
I
Allowed for pairing with 3 handsets to the maximum
I
•With ViaSync 3 bluetooth mobile phones can be paired.
•With fully paired 3 phones already, when you make pairing with the 4th handset, precedently paired handset will
be deleted and 4th handset will be registered.
•Priority over the latest paired handset.
•When you want to change the priority over the handset, try to connect from the handset.
•If the latest paired handset supports handsfree profile and you turn on the ViaSync, it connects automatically.
First,
Check the
connection between
the headset with base
station, then switch
the power 'on'.
First,
take out the headset
of the base station,
then switch the power
'on'.