User's Manual

3231
Functions & Specification in the Base
Station
DC Input Jack(DC 12V)
Sliding Power S/W
Charging Circuit for Headset
LED(Power:BLUE, Charger Ind:RED)
Interface(18 pin)
2 Microphone
Line In/Out (Jack Type) : Non B/T Phone,
Mini Telephone
IrDA Receiver(Internal)
3W Speaker
Audio Amp up to 5W
Excellent Noise Suppression : 13 18dB
Superior Acoustic Echo Cancellation : >
45dB
Good Full Duplex
Side Tone Cancellation
Functions & Specification in the
Remote Controller
Support IrDA
Number Key Pad(*,#,0 ,9)
Call, End
Battery(Coin Type)
Transmission Beam Width : 70
Specification
Limited Warranty
1. This goods was produced under the strict quality management and
inspection.
2. All defectives within the applicable Warranty period/s will be repaired or
replaced, in case those faulty goods were from normal handling.
3. To get Warranty service, return the unit to the outlet from which the unit
was purchased.
4. Fill in this Warranty card and keep it.
5. Free of charge Warranty shall not apply to :
-Defects or damage resulting from use of the unit in other than their normal
and customary manner, eg, in excess of their maximum specifications or
operating instructions.
-Defects or damage from misuse, accident, neglect, improper testing,
installation, alteration or modification of any kind, or spillage of food or
liquid.
Products name :
Model number :
Purchased date: Warranty period : 1year
Outlet the unit was purchased :
Tel :
Customer Address:
Name :
Tel :
Notice : The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted.
Any change to the antenna or the device could result in the device
exceeding the RF exposure requirements and void user's authority to
operate the device.