Product Datasheet/Brochure

SEDONA ISlAND ASSEmbly INStructIONS
|
7
With one person holding the rear and side panel in place,
assemble the front panel to the bottom by placing the
front panel corners on top of the bottom panel corners and
pushing them rmly together
Tilt the front edge of the side panel away from the bottom
panel to allow the front panel mounting brackets to pass by
threaded mounting screws on the side panel. Push the side
panel into position and attach to the front panel loosely
with 2 wing nuts (Part No. 9).
Push the remaining side panel into position and attach it
to the front and rear panel loosely with 4 wing nuts (Part
No. 9). Clamp both side panels to the front and rear panels
using 4 wing bolts (Part No. 10) and clamps (Part No. 14).
After tightening the clamps go back and tighten the 8 wing
nuts (Part No. 9) to secure the side panels to the front and
back panels.
SEDONA ISLAND ASSEMBLY INSTRUCTIONS
Step 4
Assemble the Front Panel