Product Datasheet/Brochure

SEDONA ISlAND ASSEmbly INStructIONS
|
11
We recommend a qualied, trained gas service technician perform all pipe tting procedures and conduct a gas leak test
prior to installing the refrigerator. Once installed there will be limited access to the gas piping.
Working from the refrigerator cutout, nd the stainless steel exible hose from the side burner. Remove the 1/2” tting
from the exible hose and wrap the tting with Teon tape. Install the tting into the Tee tting on the grill manifold, then
connect the exible gas hose to the tting. Tighten all ttings to ensure they are gas tight. Use a leak detection liquid on
each threaded joint and check for gas leaks. See the following page for an alternate leak test method.
Do not check for leaks with an open ame.
Do not use sealant on any are ttings.
SEDONA ISLAND ASSEMBLY INSTRUCTIONS
Step 11
Making the Connections