User manual

7
3. The use of Application
The application is a tool to manage the wireless adapter, use
it can
check and amend the configuration of the wireless adapter, or monitor
the running status of your wireless adapter.
3.1 Launch the Utility
After launching the utilities, you will see the icon
shown in the right.
Right click the icon, the four items: Launch
Configuration Utilities are appear; Use Zero Configuration as
Configuration Utility; Switch to AP Mode and Exit will appear.
To use the application offered
by Windows means to use the
defaulted wireless
management application of
Window, not Ralink application.
Chapter 4 will introduce the using of Windows wireless management
application.
Now choose
“ Launch the Utilities” , the main wizard of the application
will appear. There are Profile, Network, Advanced, Statistics, WMM,
WPS, related information, etc.
3.2 Wireless Network
Open the label
“ Network” , this page shows the status of the wireless
network of your wireless adapter. If necessary, it can be sorted by
SSID, Channel and Signal.