User manual

32
extension of security channel. In the extensible function edition 3(CCX
v.3) which is compatible with Cisco, Cisco increases supports for
EAP-FAST, the protocol establishes verified channel between user
port and sever by using PAC. Mutual validation doesn’t need to use
certificate, but use certain method of PAC to achieve it. PAC can
provide allocation to user port with manual operation or automatic
operation. As to Tunnel Authentication, it only offers “Generic Token
Card “.
LEAP: The extensible verification communication protocol. LEAP is an
EAP authentication type which mainly used to Cisco Aironet WLAN,
which uses WEP encryption to encrypt the data transmission and
supports the common authentication.
MD5-challenge: Message data 5. MD5 is a kind of EAP authentication
type which offers basic level EAP support, it is only adapt to the single
authentication. There isn’ t common authentication between wireless
user port and network.
Session Resumption After the signal is broke off and reconnected,
you can make setting to reduce the packet when reconnected, and
expedite the reconnection. There are two styles for option,
“Disabled” and “Enabled “.
Tunnel Protocol According to different authentication styles Tunnel
Authentication includes: “ EAP-MSCHAP v2 “、”EAP-TLS/Smart
card“、” Generic Token Card “、” CHAP”、 “MS-CHAP “、”
MS-CHAP-V2 “、” PAP ”、 “EAP-MD5 “。
4. Zero Configuration
Right click utility of the system tray to choose
“ Use Zero