User manual

31
【802.1x configuration】
When choose
“ WPA” or “ WPA2” under authentication mode
you could configure this option. If you chose “ Open” and
“ Shared-key” , you could also click “ 802.11 x authentication” to
configure 802.11x.
The authentication includes,
PEAP --PEAP (Protected Extensible Authentication Protocol) is an
edition of EAP Extensible Authentication Protocol。EAP assures the
mutual authentication of wireless users and server at the networking
operation center.
TLS/Smart Card -- TLS (Transport Layer Security) is used to
configure up an encryption channel and obtain the authentication of
server, similar to the webpage server authentication by SSL(Secure
Sockets Layer). This way uses data certificate to check the identity of
users and server.
TTLS -- TTLS uses certificate to validate the server identity and keep
the similar security properties of TLS at the same time, such as, the
shared secret of the mutual authentication and dialog WEP key.
EAP-FAST: Authenticate communication protocol through the