User manual

Delete - To delete the configuration which will not be used.

Edit - To modify the configuration of wireless network.

Activate- To choose a configuration which applies to the present

network from several configuration documents.

Append - To increase new configuration.

【System Configuration】

RTS --RTS/CTS (Request to Send/Clear to Send) is used to lower the

conflict among wireless base stations to the minimum. When

RTC/CTS is open, the router will resend the data frames until another

RTC/CTS is finished. You could start the RTS/CTS by configuring the

minimum and maximum value of the packet, we suggest using the

default (2347).

Frame value ---Frame value is used to divide 802.11 frame into the

smaller segments and transmit them to the target independently. You

could specify the minimum and maximum value of the packet to start

the segmentation. If there are many conflicts among the wireless

network, you could make tests by configuring different maximum

value to strengthen the frame transmission reliability. For the general

use, we suggest using the default (2346)