Installation manual
INSTALLATION MANUAL AND USERS GUIDE
Multi Split Series – Ductless Split – Cassette Indoor unit
04006030101 © Sedna Aire Europe GmbH 10 02/2014
Clean the filter
Use a vacuum cleaner for removing the
dust from the filter or
Wash them with water and a mild cleanser
and dry them in the shade (no full sun
exposure)
NOTE: Never use water above 45°C to wash
filter. This can cause deformation or
discoloration. Never parch it by fire, since this
could cause a fire or deformation.
Eventually change purifiers
For absorbing CO, CO2, benzene, aldehydes and
odors. They can adsorb soluble materials with a
particle size smaller than 1µm in air like dust,
pollen bacteria etc. Usage time is 6 months and
need to be changed:
Unscrew fixing bolts on purifier and take
purifier out
Install new filters in frame and reinsert
purifiers in the air filter
Reinsert the filter
Fix the purifiers on the filter, install filter on the several bulges on top of the grille. Pull the handle
behind the grille toward inside to fix the filter. Close the air inlet grill analogue to step 1
Repetitive maintenance of indoor unit
Turn power off
Clean air inlet grill
Clean air inlet filter
Change air purifier filter
Clean outlet vent and surface panel
Maintenance before and after usage season
Before season
Check inlet and outlet vents for blockages
Check if earthing wire is connected properly
Check if air filter is clean and installed well
Check whether the batteries in your remote
control or still operational
Turn on main power 2 hours before use
After season
Clean filter and body
Clean outlet vent and surface panel
Cut off main power supply of air conditioner
Purifier
A
ir Filter
Stand for
p
u
rifi
e
r
Fix bolt of
p
urifier










