Instruction Guide

8
3. The system operating instruction
3.1 The mattress installation and internet connection setting
After powered on the mattress and connected the mattress gateway to the external network, the
mattress could send the data to the cloud server (AWS) of CMS, and the analyzed data could be displayed
and stored for further care applications. The operating instructions of mattress installation and internet
connection setting are as following:
1. Put 2 AA batteries into the data processor of the mattress to enable the sensing function of the
mattress. The mattress will works automatically without any setting after powered on.
2. Connect the mattress data gateway to the Wi-Fi router which is with the external network
I. Power the mattress data gateway on.
II. Reset the mattress data gateway. Keep pressing the reset button of the mattress data
gateway for 15 seconds when the orange light is flushing (Figure 4).
Figure 4. Press the reset button to reset the mattress data gateway
III. Open the Internet setting APP to start the internet connection process. And press the button
“Enter the setting function” on the APP of the first page (Figure 5a). Then press the
“Next step” on the APP of in the second page (Figure 5b).
IV. Choose the device named“WhizCONNECT:xxxxxxxxxxxx”, and press the button of
“Next step” (Figure 5c).
V. Enter the SSID and Password of Wi-Fi router which is with the external network and ready
to connect with mattress data gateway (Figure 5d).