Specifications

Pre-Programmed Modes

Mode 7: Pre-action/Deluge, Dual Hazard, Cross-zoned, Split Release

Zone Configuration

• Detection Zone -1: Alarm (Hazard Area 1, cross-zoned)

• Detection Zone -2: Alarm (Hazard Area 1, cross-zoned)

• Detection Zone -3: Alarm (Hazard Area 2, cross-zoned)

• Detection Zone -4: Alarm (Hazard Area 2, cross-zoned)

• Detection Zone -5: Supervisory

• Detection Zone -6: Water-flow.

• NAC -1: Escalating Signal, indicates Hazard Area 1 status

• NAC -2: Escalating Signal, indicates Hazard Area 2 status

• RAC -1: Releasing Circuit (Hazard Area 1)

• RAC -2: Releasing Circuit (Hazard Area 2)

Hazard Configuration

• Default Release Timer Value: 0 seconds

• Default Manual Release Delay: 0 seconds (not used)

• Default Abort Delay Type: Standard UL (not used)

• Default Soak Timer Value: 0 seconds (continuous)

NAC Configuration

• Default Escalating NAC code of Hazard Area State:

• Hazard Idle: Off

• Hazard Alert: Temporal

• Hazard Alarm: 120BPM

• Hazard Release: Steady

• Default NAC code of Supervisory is 20 BPM.

Detection Zones Phantom Zones Release Timers

Z1 Z2 Z3 Z4 Z5 Z6 Zp1 Zp2

RT1

Exp

RT2

Exp

Alm Alm Alm Alm Supv WF Z1+Z2 Z3+Z4

Out1 Signal Steady XX

Out2 Signal Escalating XX

Out3 Rel. Releasing X

Out4 Rel. Releasing X

RLS TMR 1 Started X

RLS Tmr 1 Interrupted

RLS Tmr 1 Cancelled

RLS Tmr 2 Started X

RLS Tmr 2 Interrupted

RLS Tmr 2 Cancelled