Specifications

MR-2320 Series Installation and Operation Manual
49
Command Menu-->Dialer-Config
Dialer Enable/Disable
7. Test Dialer (Command-Menu)
Note: Refer to How to Use the Keypad to Program the MR-2320 on page 34 for detailed instructions on
making menu selections.
[X] ENABLE ->Default
[ ] DISABLE
The dialer is enabled by
default. When the dialer is
enabled or disabled, a warning
message appears.
Warning: The dialer cannot
report any event to the
monitoring station if it is
disabled.
Press Enter to test Line #1. Press
Cancel to exit this menu. For a
description of test messages, see Dialer
Test Messages on the following page.
Press Enter to test Line #2. Press
Cancel to exit this menu. For a
description of test messages, see Dialer
Test Messages on the following page.
This feature flushes all reportable events
from the buffer. Press Enter to reset the
dialer. Press Cancel to exit this menu.
Dialer Ena/Dis
[X] ENABLE
------WARNING-----
Dialer Disabled!!!
-Dialer Test-
1. L#1 Manual test
2. L#2 Manual test
3. Reset Dialer
L#1 Manual test
L#2 Manual test
3. Reset Dialer