Specifications

MR-2320 Series Installation and Operation Manual
47
Command Menu-->Dialer-Config
Report Options
Command Menu/Dialer-Config/Telephone
Line
5.Number of retries
06 ->Default
Number of retries
ranges between 5 to 10
Set the number of retries for
both line#1 and line#2. This
function lets the dialer retry on
either line if it is busy or not
available. If the retry count
expires, the panel reports a line
trouble.
Note: Refer to How to Use the Keypad to Program the MR-2320 on page 34 for detailed instructions on
making menu selections.
Command Menu/Dialer-Config/Report
Options
1. Alarm Report priority
[X] Account 1->Default
[ ] Account 2
Use this function to set the
account priority for reporting
alarms. If the priority is set for
account#1 then the dialer will
try account#1 first for reporting.
Command Menu/Dialer-Config/Report
Options
2.Trouble priority
[X] Account 1->Default
[ ] Account 2
Use this function to set the
account priority for reporting
trouble. If the priority is set for
account#1 then the dialer will
try account#1 first for reporting.
Command Menu/Dialer-Config/Report
Options
3. Supervisory priority
[X] Account 1->Default
[ ] Account 2
Use this function to set the
account priority for reporting
supervisory troubles. If the
priority is set for account#1
then the dialer will try
account#1 first for reporting.
Number of Retries:
06
-Report Options-
1. Alarm Prio.
2. Trouble Prio.
3. Supv. Prio
4. Aux Dis Report
Alarm Report Prio:
[X] Account 1
Trouble Report Prio:
[X] Account 1
SUPV Report Prio:
[X] Account 1