Specifications

Configuration

6. Dialer Config (Command-Menu)

The following illustration shows the dialer configuration menu. This menu will show up only if there is a built-in dialer

on the main board. Each item in this menu is described below in detail.

Command Menu-->Dialer Config

Account Info

Note: Refer to How to Use the Keypad to Program the MR-2320 on page 34 for detailed instructions on

making menu selections.

Command Menu/Dialer Config/Account Info

1.Account# 1 Identification

123456->Default

Use this function to set the

Account ID for the monitoring

station to which the dialer

reports events. The maximum #

of digits allowed is six. For

contact ID, only the first four

digits are used; the last two are

truncated.

If you are using contact ID the

allowed digits for the account

ID are simple digits 0 to 9 and

hexadecimal digits A to F (the

SIA protocol only allows digits 0

to 9).

To enter hexadecimal digits,

press the INFO button. The

letter “A” will appear. To scroll

through the rest of the letters,

press INFO repeatedly. Press #

to move the cursor to the right

or press * to move it to the left.

-Dialer Config-

1. Account Info

2. Telephone line

3. Report Options

4. Time Parameter

5. Enable/Disable

-Account Info-

1. Account#1 ID

2. Account#1 Tel

3. Accnt#1 Format

4. Account#2 ID

5. Account#2 Tel

6. Accnt#2 Format

Account#1 ID

123456