Specifications

Configuration

3. Set password (Command-Menu)

The user can change the password only for the current access level as well as any lower levels.

Note: Refer to How to Use the Keypad to Program the MR-2320 on page for detailed instructions on

making menu selections.

First choose the level of password to

be changed

Then

If the passcode does not match, the

following message appears and the

system exit to the main menu

If the passcode is OK the following

message appears and exits to the main

0 -> Default

Use this function to change the

pass-code. The minimum

number of digits is 4 and the

maximum is 10. Only numeric

digits are allowed.

Select Access Level

Enter new passcode:

Re-enter new passcode:

invalid passcode

passcode updated