Specifications

Indicators, Controls and Operations

Menu Buttons

To use the menu buttons you will need to install the CFG-300 configuration tool. See Using the CFG-300 Tool on

page for details.

Switches and Common Indicators

The MR-2320 Series panel is a six-zone panel with four output circuits. The circuits are arranged in the following

configuration:

Zone 1 Input circuit

Zone 2 Input circuit

Zone 3 Input circuit

Zone 4 Input circuit

Zone 5 Manual Release/Abort switches combination or individual switch

Zone 6 Manual Release/Abort switches combination or individual switch

Out 1 NAC1

Out 2 NAC2

Out 3 Releasing circuit 1

Out 4 Releasing circuit 2 or NAC3 in some applications

Zone 1 to Zone 4

• Alarm LED (red) turns on steady when an alarm is detected

• Supervisory LED (amber) turns on steady when the circuit is active

• Trouble LED (amber) turns on at slow flash rate when in trouble or bypassed

Zone 5 and Zone 6

• Alarm LED & Trouble LED The zone type and LED behavior varies upon the configuration. Steady when

turned on.

Out1 and Out2 (NAC circuits)

• Trouble LED (amber) turns on at slow flash rate when in trouble or bypassed

Out3 and Out4 (Releasing circuits)

• Trouble LED (amber) turns on steady when the circuit is bypassed

turns on at slow flash rate when in trouble

Input Circuits Bypass Switch

These bypass switches are used to bypass the input circuit. Bypass is a toggle switch which will bypass and un-

bypass in a sequence whenever the switch is pressed. When the input circuit is bypassed a trouble is generated and

the system will not respond to any trouble or alarm on the bypassed input circuit. If the bypassed input circuit is

active and the Bypass Switch is pressed for un-bypassing, the Alarm LED will flash at the fast rate for 10 seconds.

During these 10 seconds, pressing the Bypass Switch can bypass the active input circuit again. After 10 seconds,

the bypassed alarm will be processed.

Menu Button

Pressing and entering the passcode will allow you to enter the command menu.

Info Button

When the system is off-normal, press to display extra information of the event.

Enter Button

Pressing this button to select a menu option or to confirm a menu operation.

Cancel Button

To return to previous menu in the configuration or command mode.