User guide

MR-2100/2200 Programming Manual
58
These keyboard commands are available on all screens.
88 Control Modules For a single circuit, shows a grid displaying the current status of
all the Control modules.
Commands
A Display next device
(address)A Display selected device at address
0 M Reset Minimum/Maximum Values
0 P Energize both sets of terminals
1 P Energize only B terminals
2 P Energize only A terminals
89 Bypass & Test Displays the Bypass and Test status of all devices on an
addressable circuit.
Commands
A Display next device
(address)A Display selected device at address
0 M Reset Minimum/Maximum Values
0 P Energize both sets of terminals
1 P Energize only B terminals
2 P Energize only A terminals
90 Analog Displays the analog values of 10 consecutive addresses for a
single circuit.
Commands
A Display next device
(address)A Display selected device at address
0 M Reset Minimum/Maximum Values
0 P Energize both sets of terminals
1 P Energize only B terminals
2 P Energize only A terminals
92 Sensitivity Displays the Day/Night status, the default and manual
sensitivities of all sensors on an addressable circuit. Dots are
shown for any value that is not used.
Commands
C Display next addressable circuit
93 Sensitivity List Displays the value each sensitivity setting represents.
Command Description
<Del> Clear and redisplay screen.
<Tab> View next available screen. Unused/unavailable
screens are skipped over.
<Backspace> View previous available screen. Unused/unavailable
screens are skipped over.
0<Tab> View Index screen showing the numbers of all available
screens.
Screen Name
Description