User guide

MR-2100/2200 Programming Manual
55
14 Printer A copy of everything sent to the printer. This is useful for
capturing print-outs to a file. Note: Status line updating is
disabled while on this screen.
15 Printer Status Displays the current printer status.
16 Network Displays information about network communications. This
includes frames sent and received, frames in error and orphan
messages.
Commands
0 V Clear counters on screen
17 Port 1 Displays information about the primary network port. Includes the
status of the panels that are and should be online.
Commands
0 V Clear counters on screen
18 Port 2 Displays information about the secondary network port. A
question mark appears in front of the baud rate when the port is
off-line.
Commands
0 V Clear counters on screen
19 Port 3 Shows the current status ID, frame count and baud rate for the
central station communications link. A question mark will appear
in front of the baud rate when the port is offline.
Commands
0 V Clear counters on screen
26 Port 6 Shows the current status of the MR-2614 and MR-2644
annunciators, as well as the city tie module or dialer. Note: ID 1
is the MR-2200HS-3200 front display.
27 Misc. Outputs Displays the status of follow trouble, follow supervisory and aux
power output types.
29 System Reset Displays a list of resettable items. These are the items that are
reset when System Reset is pressed.
38 Switches Show the current on/off status of each switch and list the timer
associated with each one.
49 Clock Shows the status of the Daylight Savings Time option & clock
calibration.
50 Tasks This screen is restricted to Privilege Level 1 and above. This
screen is for factory use only.
Screen Name
Description