User guide

MR-2100/2200 Programming Manual
29
The Groups List is a list of all
currently defined groups. Each
line entry includes the Group ID
and its message/description. Click
on the desired group in order to
program it.
The Definition specifies the
identifier of the alarm or trouble
being sent to the central station.
The zone types that are available
are Fire, Sprinkler, Heat, Water
and Untyped.
The Reporting Codes are used
when SIA or Contact ID is set to
Programmed, or when using BPS
formats. There are six reporting
codes for each group. They are:
• Zone Alarm Reporting
Code
• Zone Alarm Restoral Reporting Code
• Trouble Reporting Code
• Trouble Restoral Reporting Code
• Supervisory Reporting Code
• Supervisory Restoral Reporting Code
Dialer Maintenance and Common Reporting Codes
The Dialer Maintenance and
Common Reporting Codes
dialog (see Figure 18) contains
maintenance and common
reporting codes that the dialer
will use to communicate those
events.
The Reporting Codes List is a
list of all available maintenance
and common reporting codes.
Select one to program its
reporting code.
The Reporting Code is used
when SIA or Contact ID is set to
Programmed, or when using
BPS formats. There are many
different reporting codes in this
group.
Figure 17: Zone Data
Figure 18: Dialer Maintenance and Common Reporting
Codes