User manual

Page 4 Security & Electronic Technologies GmbH
Operating media
Fuel oil EL acc. to DIN 51603-1
Petroleum fire point > 55°C
Diesel fuel DK acc. to DIN EN 590
Alcohol fire point > 55°C
FAME (Biodiesel) acc. to DIN EN 14214
Glycerin
Hydraulic oil
Glycol
Motor oil
Brake fluid
Vegetable oil
Water
Urea solution e.g. AdBlue acc. to DIN 70700
Petrol with fire point < 55°Conly with SmartBox in EX-version
Installation
Check the indicator and the probe element for transport damages before start
of the installation. Indicator and measuring probe must only be installed and
commissioned by qualified personnel. This requirement also applies to
maintenance and repairs. In case of improper installation, any warranty
claims will be forfeited.
- The device must only be installed into tanks which are not operated
under pressure. This is to say that the tanks must be equipped with a
tank ventilation according to the regulations. Additionally, heating oil
and fuel tanks must have a functioning limit monitoring indicator as
overfill protection.
- The inlet of the probe cable at the tank must be sealed in such a way
that no smell will permeate or water will penetrate under operating
conditions.