Instructions

Version 04-2017
Setup and Operation
P. 3
Choose the displaying mode:
In menu step ‘6. View‘ the favored displaying mode has to be selected.
Therefore the menu steps 1 to 5b need to be setup.
The upper display line shows the name of the tank/fluid.
The tank can be renamed in ’18. Language+Name‘.
The lower display line can show the fillable free space in the tank and /or the inventory volume in
percent up to the filling limiter or the present cm level.
Setup: View tanks ‘Single/Details’
In line 2: Fillable space (-) L + Vol. percent:
(bottom left) (bottom right)
In line 2: Fillable space (-) L + Level in cm:
In line 2: Volume percent + Level in cm:
RECOMMENDATION:
Choose displaying of fillable space + % or cm.
In case of tank filling the person has to determine the fillable free space in the tank
before start fueling.
Another benefit:
In the graphic above the left value in the lower line shows –x.xxxL
That is the fillable free space as well as the consumed amount since last time
the tank has been fueled up to the filling limit.
ALTERNATIVE In case of a QUATTRO-xxx device
with 2 or 3 or 4 measuring probes (3 tanks in example)
the displaying may be setup to ‘common/together‘.
(Shows only the Liter values, without paging forward.)
Additionally the total inventory ∑ can be displayed,
showing the Liter sum and the single % values of
each tank: Select ‘Percent values = YES’