Quick Start Guide

5.2 STGO2 Setup

Steps:

1. Download and install the STGO2 app by searching

“STGO2” in App Store or Google Play

2. Launch the app and register for a STGO2 user account.

3. Log in STGO2 app after registration.

5.3 Adding Camera to STGO2

Before you start:

You need to enable the STGO2 service on camera before adding

it to your STGO2 account. Refer to Chapter 5.1.

Steps:

1. Use a network cable to connect the camera with a router if the

camera does not support Wi-Fi.

Figure 5-3 Connect a Router

Note:

After the camera connects to the network, please wait one

minute before any operation on the camera using STGO2 app.

2. In the STGO2 app, tap “+” on the upper-right corner and

then scan the QR code of the camera to add the camera.

ST-IP4FB·Quick Start Guide