Quick Start Guide

32
32
5 Operating via Guarding Vision/STGO2
Purpose:
STGO2 is an application for mobile devices. With the App, you can
view live image of the camera, receive alarm notification and so on.
Note:
STGO2 service is not supported by certain camera models.
Enable STGO2 Service on Camera 5.1
Purpose:
STGO2 service should be enabled on your camera before using the
service. You can enable the service through SADP software or web
browser.
5.1.1 Enable STGO2 Service via SADP Software
Steps:
1. Check the checkbox of Enable Guarding Vision/STGO2 on:
1). "Activate the Device" page during camera activation, refer to
Chapter 3.2.2.
2). Or "Modify Network Parameters" page during modifying IP
address, refer to Chapter 3.3.
2. Create a verification code or change the verification code.
ST-IP4FB·Quick Start Guide