Quick Start Guide

11
11
Description Table 1-2
No.
Description
No.
Description
1
Mounting Base
7
Memory Card Slot
2
Back Case
8
Power Supply Interface
3
Sun Shield
9
10/100M Self-adaptive
Ethernet Interface
4
Lens
10
PoE Cable
5
Adjusting Nut
11
GND Screw
6
WPS/RESET Button
 This type of bullet camera supports PoE power supply. You can
power the camera by connecting both DC 12V interface and the
Ethernet interface. Or you can connect the Ethernet interface
only.
 WPS/RESET Button
WPS function and Reset function share the same button. The
button works as a reset button only when you press it when the
camera is powered on.
Resetting the Camera 1.2.1
Press WPS/RESET button about 10s when the camera is power on or
rebooting to restore the default settings, including the user name,
password, IP address, port No., etc.
ST-IP4FB·Quick Start Guide