Quick Start Guide

ST-IP2PTZC QUICK START GUIDE

Figure 2-3 Disassemble the Speed Dome

5. Drill four M8 screw holes on the wall according to the screw holes of the wall mount.

6. Secure the wall mount to the wall with screws.

Notes:

 For cement wall mounting, you need to use the expansion screw to fix the mount.

The mounting hole of the expansion pipe on the wall should align with the mounting

hole on the mount.

 For wooden wall mounting, you can just use the self-tapping screw to fix the bracket.

 Please make sure that the wall is strong enough to withstand more than 8 times the

weight of the dome and the mount.

Figure 2-4 Install the Wall Mount

7. Wrap the threaded part with the thread tape and rotate the pendant adapter to the

wall mount.

8. Secure the pendant adapter to the wall mount with a set screw as shown in Figure

2-5.

Protective

sticker

protectivefoam

Expansion Screws

Nuts and

Washers