Quick Start Guide

ST-IP2PTZC QUICK START GUIDE
4
 Exposing the equipment to direct sun light, low ventilation or heat source such as
heater or radiator is forbidden (ignoring this can cause a fire hazard).
 Do not aim the speed dome at the sun or extra bright places. A blooming or smear
may occur (which is not a malfunction), and affecting the endurance of the sensor at
the same time.
 Please use the provided glove when open up the dome cover, avoid direct contact
with the dome cover, because the acidic sweat of the fingers may erode the surface
coating of the dome cover.
 Please use a soft and dry cloth when clean inside and outside surfaces of the dome
cover, do not use alkaline detergents.
 Please keep all wrappers after unpacking them for future use. In case of any failure
occurring, you need to return the speed dome to the factory with the original
wrapper. Transportation without the original wrapper may result in damage on the
speed dome and may lead to additional costs.