Quick Start Guide

ST-IP2PTZC QUICK START GUIDE
10
Figure 2-7 Tighten the Lock Screws
2.2 In-ceiling Mounting
Before you start:
The in-ceiling mounting is applicable to indoor ceiling construction. The following are
the mandatory preconditions for mounting:
 The height of the space above the ceiling must be more than 250mm.
 The thickness of the ceiling must ranges from 5 to 40mm.
 The ceiling must be strong enough to withstand more than 4 times the weight of the
dome and its accessories.
Steps:
1. Rotate the lower dome counterclockwise to separate it from the back box as shown in
Figure 2-8.
2. Remove the protective lens cover, foam and sticker from the dome drive.
3. Attach lower dome to the back box, and rotate clockwise to secure it.
Figure 2-8 Remove the Protective Accessory
4. Drill a hole on the ceiling according to the drill template (supplied).
Lock Screw
Lower Dome
Foam
Sticker
Back Box