Quick Start Guide

ST-IP2PTZC QUICK START GUIDE
9
9. Loosen the lock screws of the adapter.
Figure 2-5 Install the Pendant Adapter
Note: The dimension of pendant adapter is G1
1
2
.
10. Hook the two ends of the safety rope to the back box of the speed dome and the
wall mount respectively. Route the cables through the mount.
11. Align the direction label of pendant adapter with the label of the back box to install
the speed dome as shown below.
Figure 2-6 Align the Labels
12. Rotate the back box clockwise tightly. Secure the back box and the pendant adapter
with the two lock screws.
②
①
Pendant Adapter
Top View of
Pendant
Adapter
Lock Screw
Lock Screw
①
②
③
④