User Manual

Page.33.
WLAN Net：Turn WiFi off or on by pressing the “Open the wifi” button. Once WiFi is turned on, it will scan for wireless
networks in your area. Select the desired wireless network SSID and enter your password to connect. The IP BUDDY+
meter is only known to work with WPA2-PSK security.
Brightness：Set the desired brightness of the IP Buddy+ and adjust the sleep time settings.
Volume：Change volume levels.
SD Card：Displays SD Card Capacity. You can also format the SD card or unmount it before removing it.
FTP server：Once the IP BUDDY+ connects to a network, a computer can be used to read the SD card files via FTP.
Start the FTP server and then input the tester’s FTP address in the PC’s address bar. (ftp://ipaddress:2121) This will
enable the PC to read, copy and edit the files from the SD card without the use of SD card reader.