SM-816DT User’s Manual 2.
© Copyright 2012 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty SecurityMan Inc warrants that this product will be free from defects in title, materials and manufacturing workmanship for one year or otherwise specified on the product packaging. This limited warranty shall commence from the date of purchase. SecurityMan products warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer’s only obligation, SecurityMan will repair or replace the product.
Table of Contents Restrictions 1 Conditions 3 Features 3 Package Contents 4 Specifications 5 Product Basics 5 Operation 6 Adding Camera to SM-371DR/SM-804DR 6 Removing Camera from SM-371DR/SM-804DR 7
Restrictions Please read the following messages to make sure your working environment is suitable. • DO NOT place this product too close to medical equipments. 1. Radio waves might potentially cause breakdown of medical electrical equipments and thus cause incidents. 2. Place the product at least 22cm from the heart pacemaker. Radio wave potentially influences heart pacemaker and thus leads to respiratory disturbance.
• DO NOT use the camera in the places which are covered with metal. The around metal, such as elevator and cabin, might shield the electromagnetic wave, and result in inability to receive signals. • DO NOT put the plastic package bags in reach of children or babies. Young children can choke on these items if they put them into their mouths. • DO NOT plug the AC adapter into the outlet in improper situations. • DO NOT plug in an AC adapter with wet hands might cause electric shock.
Conditions Please read the following messages to make sure your working environment is suitable. • The temperature should be kept between –10˚C and 50˚C (14˚F to 122˚F). The relative humidity should be kept between 20% and 80%. • Avoid putting the product in places where temperature or humidity may change rapidly. • Keep it dry, dustless and avoid lens exposure in direct sunlight. • Keep product away from heat sources such as electric heaters. • Do not use the camera near harmful chemicals.
• No Wi-Fi interference; no interference from crowded analog 900MHz/ 2.4HGz/5.8GHz/6.
Specifications Image Sensor Resolution View Angle Audio Minimum Illumination IR LED Night Vision Range Weatherproof Rating Antenna Consumption Current Mounting Bracket Power LED Indicator Power Supply Dimensions Pairing Button CMOS Color 640 x 480 pixels (NTSC/PAL selectable) 45 degree Microphone built-in (audio monitoring up to 30ft) 2 Lux (IR off); 0 Lux (IR on) Up to 30ft (B/W) IP54 1 x Angle adjustable antenna 500mA Angle adjustable 1 DC 5V/1.0A 6” x 2.3” x 1.
Operation Adding camera to SM-371DR/SM-804DR Step 1: Press Pair button at the back of the camera as illustrated below. Pair Button Power LED Microphone Step 2: In the Menu options on receiver select Camera as shown below. Step 3: Select Add/Remove Camera and pair it up with an UNLOCK icon camera (1~4), as shown below.
Step 4: Select Yes to complete the Adding Camera process shown below. NOTE: When adding a camera, the Pair button located on the back of the camera must be pressed prior to pressing the OK button on the DVR/ Receiver to confirm the Add Camera selection. There is a 10 second grace period for adding cameras, if pairing is unsuccessful before the 10 second grace period has expired then an “Operation Failed” will appear, repeat steps 1~4. Pairing must be done within 20 ft from the receiver.
