Owner manual

5
Conditions
Please read the following messages to make sure whether your working
environment is suitable.
• Ensure there is enough space around the receiver for ventilation.
• The temperature should be kept between –10˚C and 50˚C (14˚F to 122˚F).
The relative humidity should remain from 20% to 80%.
• Avoid putting the product in places where occur might change rapidly in
temperature or humidity
• Keep it dry, dustless and avoid exposure in it directly in sunlight
• Keep product away from heat sources such as electric heater
• Do not use the camera near aggressive chemicals
• Do not place product near any magnetic objects
Maintenance
• Do not shake or stricken the product.
• In order to avoid inflammation or electric shock, this converter kit should be
kept away from exposure to rain or moist, and it shall not be put in or near
bath-rooms, washing pools, washhouses, moist basements, or swimming
pools, unless it is well shielded.
• In use of sockets set on walls or extension wires, attention should be paid not
to exceed their load capabilities to avoid inflammation or electric shock.
• Do not disassemble the product casings, otherwise the internal precision parts
may get damaged, or personal injury caused.
• Switch off the power supply in thunder and lightning weather or when not in
use for long periods of time.
• Do not attempt to service the product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.