DigioutAir User’s Manual Digital Wireless Outdoor/Indoor Color Camera Kit with Audio and Night Vision
© Copyright 2012 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty Disclaimers SecurityMan Inc, makes no other warranties, express, implied or otherwise, regarding this product, and specifically disclaims any warranty for merchantability or fitness for a particular purpose. The exclusion of implied warranties is not permitted in some states and the exclusions specified herein may not apply to you. This warranty provides you with specific legal rights. There may be other rights that you have which vary from state to state.
Table of Contents Introduction 4 Important 4 Restrictions 5 Conditions 7 Package Contents 8 Specifications 9 10 Features 11 Product Basics Camera (SM-703DT) 11 Receiver (SM-451DR) 11 Quick Start 12 On-Screen Display 14 Operation 14 Troubleshooting 15 3
Introduction Thank you for purchasing the SecurityMan DigioutAir. The DigioutAir is a “Do-It-Yourself” Digital Wireless Security camera kit designed for easy installation and operation. With surveillance made easy, this DIY kit will allow you to monitor your home, business, front or back doors, garage, backyard, or any location that you would like to keep an eye on.
Restrictions When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe all warnings in the product operating instructions. To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observes the following precautions. PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law.
• DO NOT plug the AC adapter into the outlet in improper situations. • Plugging in an AC adapter with wet hands might cause electric shock. • Plugging in the AC adapter unsteadily might cause fire or electric shock. • DO NOT cover the AC adapter when it is connected to an outlet, place the adapter near heaters, or put it on the floor which is equipped with a heater. The above mentioned operation might cause fire or incidents. • DO NOT use it aboard; please abide by the airway’s provision.
Conditions Please read the following messages to make sure your working environment is suitable. • The temperature should be kept between –20˚C and 50˚C (-4˚F to 122˚F). The relative humidity should be kept between 20% and 80%. • Avoid putting the product in places where temperature or humidity may change rapidly. • Keep product away from heat sources such as electric heaters. • Do not use the camera near harmful chemicals.
Package Contents 1 x Receiver (SM-451DR) 1 x Camera (SM-703DT) 1 x Bracket 1 x Antenna 2 x AC Adapters 1 x AV Cable 5 x Screws User’s Manual 8
Specifications SM-703DT (Camera) SM-451DR (Receiver) Wireless Image Sensor Resolution View Angle Weatherproof Rating Night Vision Range Audio Minimum Illumination Pairing Button IR LEDs Power Supply Dimensions (LxWxH) Pairing Button Channel Button AV Output Power Supply Dimensions Stand Frequency Transmission power Receiver Sensitivity Modulation Antenna Transmission Distance Operating Temperature Operating Humidity 1/4” CMOS Color 510 x 492 pixels (NTSC) 35 degree IP65 Up to 50ft / 15m (B/W) Microphon
Features • Do-it-yourself (D.I.Y) easy to setup and use wireless camera kit • Weatherproof camera housing for outdoor and indoor applications • Wireless transmission up to 200ft between walls or up to 490ft in clear line of site • No Wi-Fi interference; no interference from crowded analog 900MHz/2.4GHz/5.8GHz/6.
Product Basics Antenna Camera (SM-703DT) Sun Visor Lens Night Vision LED Light Sensor Power Jack Pairing Button MIC Receiver (SM-451DR) Antenna Channel Button Pairing Button Audio Output LED Lights Video Output Power Socket Docking Stand 11 Bracket
Quick Start Camera 5VDC/1.5A 1. Mount the camera in the desired position. Be sure to plug in the power to the camera and attach the supplied antenna. CAUTION: To prevent electric shock or damage to the camera, please be sure to properly insolate the camera’s microphone and power connections if being used as an outdoor application. Microphone is for indoor use only. Receiver Monitor 5VDC/1.
2. Plug in the receivers power supply and connect the AV (audio/video) cable from the AV output of the receiver to your TV or recording devices (VCR or DVR) AV input. NOTE: Make sure all cords are connected tight and that you are following the proper color coding (Video/Yellow, Audio/White or Red) AV Output to TV/DVR/VCR Input or 3. Turn on your TV and set it to the appropriate input channel. The television must be on the A/V Input that you connected the receiver to.
On-Screen Display Signal Strength The signal bars on the on-screen display indicates the signal strength between the camera and the receiver. [0~1 bars = weak/no reception; 4 bars = strong reception] Signal Strength Channel No Signal Channel The channel number corresponds to the camera that is being monitored or recorded. You can toggle between channels by simply pressing the “CH” button located on the receiver.
NOTE: A “NO SIGNAL” notification will be displayed, followed by a melody if the camera and receiver are not successfully paired. To remove the camera from the receiver, simply pair another camera over the existing channel or unplug the power from the camera. Switching between channels You can switch between cameras by pressing the “CH” button located on the back of the receiver. The DigioutAir system support manual channel switching only. It does not support automatic channel dwelling and Quad channel view.
