SecurityMan ® Remote Control Pan Base for Camera User's Manual PANBASE
© Copyright 2005 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package Includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Hardware Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Pan Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Install the camera to the Pan Base . . .
Important-Safety Precautions To prevent fire or shock hazard, do not expose this product to rain or moisture. Do not use near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. • To avoid electrical shock, do not open this product. • This product should be operated to use the power supply must have the same voltage as the local area. • Do not overload wall outlets and extension cords as this can result in the risk of fire or electrical shock.
Important Information 1) Keep away from strong sunlight or sunshine to prevent power-off from increased temperature of inner mechanical components. 2) Insure sufficient power supply from local electrical system. 3) Do not use several controls with neighboring frequency closely at the same time. Close frequencies might cause slight interference. 4) Do not drop or throw the remote control. 5) Take care of your transmitter, keep it away from kids or babies, who could break the antenna or get hurt unexpectedly.
Introduction Thank you for purchasing the Remote Control Pan Base. This SecurityMan PANBASE allows you to rotate your wired/wireless video camera left, right with a 370° viewing range and remotely position a camera to any desired angle with the remote control. Features: • • • • • • • • Works great with wired/wireless security cameras 370˚ rotation range Convenient 12V DC output for security camera 2 button remote for power and rotation direction with red L.E.D.
Hardware Basics Pan Base Adjustable Camera Mount Rotating Base 12V DC Plug to Camera Antenna 15V DC Plug to Power Adapter Remote Control Antenna ON/OFF Button LED Indicator Rotation Button Clockwise/ Counter-clockwise SecurityMan 8
Install the camera to the Pan Base 1) Take the Pan Base out from the package. 2) Position the adjustable camera mount to a 90˚ degree angle. 3) Get the mounting bracket and screws out from the package.
4) Screw the mounting bracket to the adjustable camera mount. 5) Adjust the bracket to vertical position. 6) Mount your wired/wireless camera to the bracket.
7) Adjust the camera angle accordingly. 8) The Pan Base is now ready to mount on the ceiling or horizontal position. Note: User can mount the Pan Base upside-down on the ceiling or on a flat surface.
Install or replace the remote control’s battery 1) Open the cover from the back of the remote control. 2) Place one 12V 23A battery to the slot and close the cover. Note: Battery life is 1-4 month is depending on the usage. If the battery level is low, the remote controller will not be so effective. The battery can be purchased through any local electronic stores.
2) Press the left button (ON/OFF button) again and the Pan Base will stop. 3) While rotating, press the right button (Rotation button) at any time to change the rotating direction. 4) If you want to turn on or turn off the Pan Base, press the left button (ON/OFF button) twice respectively. 5) Point the remote control towards the Pan Base antenna. The remote distance should be in specification range (up to 50 meter line of sight).
Specifications Remote Control: RF Output Power RF Transmitter Frequency Battery Transmitter Current Maintain Current Dimension Weight Pan Base RF Receiver Sensible RF Receiver frequency Auto/Remote scanning angle Manual Adjust angle Speed of Scanning Max load Noise (away 30cm unload) Power Supply Dimension Weight Operation temperature range Remote control range 0dBm 433.92MHz 12V DC 23A battery 20mA 40nA 95mm x 48mm x 28mm 40g -80dBm(excel) 433.
www.securitymaninc.
