Installation Guide

Smartphone Remote Access (iPhone)

1. Open the App Store and search for “vMEyeV2” as shown in IMAGE #1

and then select the “vmeyev2” application from the list. Then tap on

“FREE” to initiate the download [IMAGE #2].

NOTE: Although the app is free, an Apple ID is required in order to

download and install the application. To obtain an Apple ID account,

please register with apple.com.

2. Tap on the “Install App” option from the app description screen

[IMAGE #3] and then enter your Apple ID “User Name” and

“Password” when prompted as shown in IMAGE #4 to begin the

installation process.

3. Once the application has been successfully installed, select “Open”

[IMAGE#5] or simply click on the vMEyeV2 icon that was created

[IMAGE #6] to begin conﬁguring the application to access the

IPcam-SD. Next, tap on the “Address Mode” when prompted as

shown in IMAGE #7.

4. Tap on the “Device Management” icon [IMAGE #8] and then select

“Add” located at the top right corner of the screen [IMAGE #9] to

add the IPCam-SD camera to the list.

5. The “Device List” screen [IMAGE #10] consist of the following

conﬁguration options:

• DeviceName – the device name does not need to match any speciﬁc setting

and is used solely to identify your camera from the applications Device

List screen. For example, if you are using the app to remotely monitor 2

x IPcam-SD (one at home and one at work), the device name for the ﬁrst

camera could be “HOME” and the second camera could be “WORK”.

• Address – IP address of the IP camera or static IP address given by your

ISP. This depends on whether you are accessing the IP camera from within

your local area network or the wide area network (static IP address).

NOTE: DDNS users can simply input the domain name here.

• Port – the mobile port number assigned to the IP camera. The default

port is 34568.

• User ID – the user name used to login to the camera. The default is admin.

• Password – the password associated with the user name. The default is

blank (no password).

• MaxChannel – change 16 to 1 so that it matches the number of channels

available on the camera (1).

6. When ﬁnished, tap the “SAVE” button located at the top right corner

of the screen [IMAGE #11] and your device will now be displayed in the

Device List as shown in IMAGE #12 above.

7. There are two ways to initiate the live view. The ﬁrst way is to tap on the

Device Name from the Device List screen as shown in IMAGE #13 and then

select channel 1 from the drop down [red arrow in IMAGE #13] or simply

tap on channel #1 from the “Live View” screen as shown in IMAGE #14.

NOTE: To enlarge the live view screen double-tap on the live view image.

9 10