Installation Guide

CMS Remote Access (Intranet)

1. In the main CMS screen, double-click on the IP address, and then

double-click on CAM01 to connect to the IPCam-SD and the

camera image should appear on your screen.

2. To record video ﬁles to your computer, click “System”, and then click

“PC Conﬁg”.

3. In “PC Conﬁg” window, make sure “Overwrite” is checked. Next

select the disk/partition you want to save the video ﬁles, and then

click “Browse” to choose the destination folder as shown below. Click

“Apply” to conﬁrm the changes, and click

to go back to main CMS

screen.

4. To start recording, right-click on camera image and choose “Local

record” as illustrated below.

P2P (Point to Point) Remote Access (Internet)

Open the Internet Explorer Browser and type http://www.xmeye.net in

the URL to register for a user name and a password or select connect

“By Device”. Connect “By Device” requires the Serial ID number of the

IPCam-SD which is located under the IPCam Conﬁg/Info/Version of

the CMS software. Then input the 4 digit on-screen code to verify the

initiate remote monitoring. Select the default “Connect all video (Extra

Steam)” and “Auto Prompt”, then click on the “OK” button to view the

IPCam-SD footages.

To Register for a P2P remote access account, please go to

http://www.xmeye.net and click on “Register”. Click on the “OK” button

after inputting all the ﬁelds and an email will be send to the speciﬁed

email address as illustrated below. To retrieve the password, login to the

email account speciﬁed.

Then use the password provided in the email to login to www.xmeye.net as

illustrated below.

After logging in, click “Device Manager” and then “Add” as illustrated

below. Input the Serial ID number in place of the MAC address which

can be found under IPCam Conﬁg/Info/Version of the CMS, give it a

Device Name (ie. Sales Floor), IPCam-SD Username (default: admin), and

Password (default: blank). Click “OK” to conﬁrm.

Next, click on “My Devices” in the upper left corner of the screen then

double-click on the device name in blue below and click “OK” to login to

the IPCam-SD.

5 6