Installation Guide

ManualsBrandsSecurityMan ManualsElectricalDIY Wireless/Wired IP Indoor Camera with H.264 Compression SD Recorder

1. Insert the Installation CD into the CD-ROM drive, and double click the

“Open folder to view ﬁles” option from the the AutoPlay window.

2. Next, double-click on the “CMS_ENG_V3-1.0.9.9.T.20121206.exe”

ﬁle to start the software installation process as shown above.

3. The CMS (Central Management Software) Setup screen will appear

as shown below. Select a desired language if the language window

appeared and then click “Next” to continue or “Cancel” to cancel

the installation.

4. Input the user name and company name. Then click “Next” to

continue as illustrated above.

5. The default Install CMS directory is C:\Program Files\CMS, click

“Change” to select a different destination folder, or click “Next” to

continue (recommended).

IPcam-SD Quick Start Guide

WiFi Security Camera for Smartphone, Tablet, and Computer

Step 1: Hardware Installation

1. Wireless antenna: Attach the wireless antenna (included) to the ANT

port located at the back of the IPCam-SD.

2. Ethernet cable: Plug the Ethernet cable (included) into the network

port of the IPCam-SD and then plug the other end of the Ethernet

cable into your router’s network port.

3. AC adapter: Plug one end of power adapter (5VDC, 2000mA,

included) into the power socket of the IPCam-SD and then plug the

other end of the AC adapter into an electric power outlet.

Step 2: Software Installation

6. The default shortcut icon folder is CMS. Click the drop-down menu

for more selections, or click “Next” to start installing the CMS to your

computer (recommended) as illustrated above.

7. Click “Finish” to complete the CMS software installation as shown below.

8. After the installation is complete, a “CMS” short-cut icon will

automatically be created on your desktop as shown above. Double-

click on the “CMS” icon to open the CMS software for IPCam-SD.

Step 3: IP Address Setup (CMS)

1. Double-click on the “CMS” short-cut icon on your desktop. Select

“English” or other languages and then click “OK” to advanced to

“Device list is empty, please add device...” prompt. Next, input the

User Name and Password at the login window as illustrated below. The

default User Name is “super” and the default Password is empty. Click

the “Login” button to login to CMS. A “Device list is empty, add your...”

window will appear as shown below, click on “OK” to continue.

Note: The default User Name is “super”, password leave blank.

1 2

Network Port Antenna Mount Micro SD Slot

Power SocketAlarm In/OutSpeakerMicrophone

Summary of content (6 pages)

PAGE 1
IPcam-SD Quick Start Guide WiFi Security Camera for Smartphone, Tablet, and Computer Step 1: Hardware Installation 1. Wireless antenna: Attach the wireless antenna (included) to the ANT port located at the back of the IPCam-SD. 4. Input the user name and company name. Then click “Next” to continue as illustrated above. 2. Ethernet cable: Plug the Ethernet cable (included) into the network port of the IPCam-SD and then plug the other end of the Ethernet cable into your router’s network port. 5.
PAGE 2
. At the CMS main screen, click on “System”, and then “Add/Remove IPCam” to open the device manager window to configure as illustrated below. 8. 3. In “Add/Remove IPCam” window, click on “ADD AREA” to open the “Zone” window as illustrated above. 4. In “Zone” window, please enter a zone name, and then click “OK” to confirm and go back to the Add/Remove IPCam window. In this Quick Start Guide, we use “Demonstration” as illustrated below. 5.
PAGE 3
CMS Remote Access (Intranet) P2P (Point to Point) Remote Access (Internet) 1. In the main CMS screen, double-click on the IP address, and then double-click on CAM01 to connect to the IPCam-SD and the camera image should appear on your screen. Open the Internet Explorer Browser and type http://www.xmeye.net in the URL to register for a user name and a password or select connect “By Device”.
PAGE 4
. For static IP address subscribers (recommended), you should have been given a static IP address by your ISP (Internet Service Provider), this is the WAN IP address you will need to access the IPCam-SD over the Internet using the IE Browser and Smartphone Applications. For those with dynamic IP address subscribers, use third party software that can be used to detect the changes in dynamic IP and send out the IP changes to email address, software such as IPWatcher, Dynamic IP Monitor, etc.
PAGE 5
Smartphone Remote Access (iPhone) 1. Open the App Store and search for “vMEyeV2” as shown in IMAGE #1 and then select the “vmeyev2” application from the list. Then tap on “FREE” to initiate the download [IMAGE #2]. NOTE: Although the app is free, an Apple ID is required in order to download and install the application. To obtain an Apple ID account, please register with apple.com. 2. 3.
PAGE 6
Buttons and Actions BUTTON NAME ACTION Play/Stop Starts and Stops the live view feed from the selected live view display box. Snapshot Takes a snap shot of the current screen. *Images are saved in the “snapshot” folder of the root directory. Device Management Opens the “Device List” page where you can add, edit or delete devices from the application. Information Displays vMEyeV2 application features and contact info.