Owner manual
Figure 95 - WebCam Surveillance
Figure 96 - RPB Setup
56 | SecurityMan
WebCam is used for monitoring purposes and and PTZ
control of protocols camera(s). To toggle between single
camera and 4 camera view, click on the “Screen 1” and
“Screen 4” accordingly. In single channel view click on
the “Next Page” button to advanced to the next camera in
ascending order. For Pant/Tilt/Zoom controls, i.e. Preset,
Speed, and Conguration please refer to page 38 above in
detail. Click on “Exit” at anytime to logout and exit out of
WebCam.
RPB (Remote Playback)
RPB Setup
RPB is a powerful remote playback software which re-
motely access SuperDVR to retrieve recorded data les to
playback remotely from anywhere at any time. To Setup
RPB enable Web Camera Service and Remote Playback
Service in Basic Conguration as illustrated below in
gure 96.
NOTICE
To enable RPB (remote playback) service go to configure
RPB service as illustrated above in figure 96. The default
port for RPB is port 1161.