Instruction Manual

38 | SecurityMan
Baud Rate - P.T.Z device Baud Rate ranges from 6.
1200, 2400, 4800, 9600 (default), 19200, 38400,
57600, and 115200. Please reference PTZ user’s
guide to specify correct baud rate for your camera.
Data bits – ranges from 4, 5, 6, 7, & 8 (default). 7.
Please reference PTZ user’s guide to specify cor-
rect data bits for your camera.
Parity – can be of None (default), Odd, Even, Mark 8.
& Space parity bit. Please reference PTZ user’s
guide to specify correct parity setting for your
camera.
Stop Bits – ranges from 1 (default), 1.5, & 2. Please 9.
reference PTZ user’s guide to specify correct stop
bits for your camera.
NOTICE
Please refer to the P.T.Z protocol camera manual/guide for
serial port setting such as Baud Rate, Protocol, Data Bits, Parity,
Stop Bits, and Address prior to PTZ Conguration.
User Conguration Panel
Click on the icon from the Cong to enter the User
Conguration panel as illustrated below in gure 52.
The system administrator default login name is SYSTEM
and the default password is N/A or no password input.
The administrator login is the most superior; they can
congure, edit, add, delete users, re-schedule recording,
and etc. Administrator login can “Add”, “Edit” and/or
“Delete” user conguration parameters.
Figure 52 - User Conguration