Instruction Manual

14 | SecurityMan
After the computer restart, go to device manager to en-
sure the hardware installation for iCamDVR exist under
Sound, Video, and Game Controllers as circled below.
To execute and run the SuperDVR software for iCamDVR;
go to “All Program > SuperDVR“ or simply double click
on the SuperDVR shortcut location on the desktop as
shown below.
Windows Vista/7 Driver Software Uninstall
There are several methods to uninstall the driver software
for iCamDVR. One way is to auto run the CD and pretends
to re-install the driver software. The following windows will
appear to conrm driver software uninstall. Click “OK” to
continue with uninstall.
NOTE
iCamDVR require PCs with USB 2.0 Host Controller.•
To disconnect or eject iCamDVR from the computer: Left •
click on the Safely Remove Hardware icon on the “Taskbar
-> Safely Remove iCamDVR Video/Audio Card”.
Using iCamDVR system with other USB capture devices •
may cause conict, make sure to close other windows cap-
ture software if SuperDVR cannot execute or show
error messages.
Avoid using two or more USB and PCI video capture de-•
vices on the hosting computer.
Figure 15 - iCamDVR Hardware
Figure 16 - Shortcut of SuperDVR
Figure 17 - Conrm File Deletion